Remote Control Door Lock Receiver Replacement
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
If the remote control door lock receiver is replaced, the following procedures must be performed:
- Keyless Entry Transmitter Programming - Refer to Transmitter Programming .
- Tire Type Setup:
- Install a scan tool
- Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.
- Select Tire Type/Pressure Selection.
- Follow the on-screen instructions.
- Tire Pressure Monitoring Sensor Learn - Refer to Tire Pressure Sensor Learn .
- RCDLR Setup:
- Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.
- Select Setup New RCDLR.
- Follow the on-sceen instructions.