Dismounting/Mounting Procedures: Notes
NOTE:
2004-06 vehicles are equipped with an Indirect TPM System. Vehicle IS NOT
equipped with tire pressure sensors mounted on the wheels.
CAUTION:
The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
NOTE:
If vehicle's tires are replaced with those not having a TPC Spec number, the TPM system may give an inaccurate low pressure warning. Non-TPC Spec tires may give a low pressure warning that is higher or lower than the proper warning level achieved by TPC Spec numbered tires.
NOTE:
2004-06: When a wheel is replaced or rotated, tire pressure has been adjusted or vehicle's battery has been disconnected, TPM system will need to be recalibrated. See TIRE PRESSURE MONITOR SYSTEM RECALIBRATION (2004-06) .
NOTE:
2007-08: The sensor learn procedure must be performed after every tire rotation, RCDLR replacement, or sensor replacement. See TIRE PRESSURE SENSOR LEARN (2007-08) .
NOTE:
On the GXP models, the front and rear tires are different sizes, and tire rotation is not recommended. Follow vehicle manufacturer's recommended procedures.