Setup for Component Replacement
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of some components will require a setup procedure for complete repair.
- Brake Pressure Modulator Valve Replacement
- Electronic Brake Control Module (EBCM) programming or replacement
- Steering angle sensor replacement
- Steering column replacement
- Steering column replacement
- Steering gear replacement
- Yaw rate and Lateral accelerometer sensor
- Center the steering wheel with the wheels facing forward.
- With a scan tool, perform the special functions steering position sensor calibration and follow the on screen instructions.