LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2007 >> Solstice Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Programming And Setup - All Systems) >> Repair Instructions >> Engine Control Module Programming and Setup >> ECM Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM Replacement

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Replacement or reprogramming of the ECM, or replacement of the clutch pedal position sensor (CPPS) or clutch pedal requires that a CPPS learn procedure be performed. Failure to perform the CPPS learn procedure may result in personal injury or damage to the vehicle or its components if the vehicle is in gear and the starter motor is accidentally engaged.

If the engine control module (ECM) is replaced, the following procedures must be performed:

  1. ECM Reprogramming-Refer to Service Programming System (SPS) .
  2. Clutch Pedal Position Sensor Learn-Refer to Clutch Pedal Position Sensor Learn .
  3. Crankshaft Position (CKP) Variation Learn for 2.2L engine only-Refer to Crankshaft Position System Variation Learn .
  4. Theft Deterrent Programming-Refer to Theft Deterrent Module Programming and Setup (N. America except Canada)  or Theft Deterrent Module Programming and Setup (Canada) .
  5. Throttle Learn Procedure-Refer to Throttle/Idle Learn (With Turbocharger) for the 2.0L or Throttle/Idle Learn for the 2.2L.
scientia non olet · About LEMON Manuals