Installation Procedure
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Route the SIR wiring harness and horn/cruise connector down steering column.
- Snap the SIR coil into position on the column.
- Connect the SIR coil and horn/cruise electrical connectors.
- Attach the wiring harness clips to the bracket below the column.
- Install the steering column covers. Refer to Steering Column Trim Cover Replacement .
- Install the steering wheel. Refer to Steering Wheel Replacement .
- Install the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement (Equinox) or Steering Wheel Inflatable Restraint Module Replacement (Torrent) .
- Enable the SIR system. Refer to SIR Disabling and Enabling .
NOTE:
A new roll connector is equipped with a yellow tab that is removed after the steering wheel is installed. This tab passes through the steering wheel.