Balance of Assembly
WARNING: This page is about a different car, the 2009 Pontiac Torrent and 2009 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- With key inserted into cylinder, insert cylinder into housing (2). This will hold the pawl (1) into position once the cylinder is inserted into the housing.
- Shutter (8) and compression spring (6) are pre assembled to the cylinder in the service package.
- Install the cap (9) by aligning the notch in the cap with the large drain slot in the housing and pressing the cap until it bottoms out and snaps onto the housing (2).