Communication Interface Module Battery Replacement

WARNING: This page is about a different car, the 2008 Pontiac Torrent and 2008 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Communication Interface Module & Battery

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the driver seat. Refer to Front Seat Replacement - Bucket . Remove the left carpet retainer. Refer to Front Carpet Retainer Replacement . Remove the left lower center pillar molding. Refer to Center Pillar Lower Garnish Molding Replacement . Move the carpet back enough to gain access to the communication interface module battery.
1	Communication Interface Module Battery Nut (Qty: 3) Tighten: 10 N.m (89 lb in)
2	Communication Interface Module Battery Tip: Disconnect the electrical connector.

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Remove the driver seat. Refer to Front Seat Replacement - Bucket .
Remove the left carpet retainer. Refer to Front Carpet Retainer Replacement .
Remove the left lower center pillar molding. Refer to Center Pillar Lower Garnish Molding Replacement .
Move the carpet back enough to gain access to the communication interface module battery.

Communication Interface Module Battery Nut (Qty: 3)

Tighten: 10 N.m (89 lb in)

Communication Interface Module Battery
Tip: Disconnect the electrical connector.