LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2007 >> Vibe Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Steering Wheel Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Place the front wheels in the straight ahead position.
  3. Remove the steering wheel from the steering column. Refer to Steering Wheel Replacement .
    4. Fig 1: Identifying Upper Steering Column Components
    GM820027Courtesy of GENERAL MOTORS CORP.
  4. Remove the 3 screws and the steering column lower trim cover (6) from the steering column.
    5. Fig 2: Steering Wheel Module Coil Electrical Connector Location
    GM839654Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the steering wheel module coil electrical connector.
  6. Disconnect the steering wheel position sensor electrical connector.
    7. Fig 3: Steering Wheel Module Coil, Steering Column And Claws
    GM820030Courtesy of GENERAL MOTORS CORP.
  7. Slide the steering column upper cover, release the 3 claws (2) and remove the steering wheel module coil (1).
  8. Remove the steering wheel position sensor from the steering wheel module coil.
scientia non olet · About LEMON Manuals