Rear Object Alarm Module Replacement (Sedan)

WARNING: This page is about a different car, the 2010 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Object Alarm Module (Sedan)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear window shelf trim panel. Refer to Rear Window Panel Trim Replacement (Sedan) .
1	Rear Object Alarm Module Procedure Disconnect the electrical connectors. Unsnap the receiver from the panel. For programming and set up, refer to Control Module References

Callout

Component Name

Preliminary Procedure:
Remove the rear window shelf trim panel. Refer to Rear Window Panel Trim Replacement (Sedan) .

Rear Object Alarm Module

Procedure

Disconnect the electrical connectors.
Unsnap the receiver from the panel.
For programming and set up, refer to Control Module References