LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> G8 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    CAUTION: Refer to Gasoline/Gasoline Vapors Caution .
    CAUTION: Refer to Safety Glasses Caution .
    CAUTION: Refer to Vehicle Lifting Caution .
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Remove the primary fuel tank module assembly from the fuel tank. Refer to Primary Fuel Tank Module Replacement .
    3. Fig 1: Locating Locking Clip
    GM2008593Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the fuel level sensor connector (4) and unclip the wiring from the harness securing clips (5).
  4. Remove the fuel level sensor from the primary fuel tank module assembly.
  5. Unlock the locking clip (3) and gently push the fuel level sensor upwards.
  6. Remove the fuel level sensor from the primary fuel tank module assembly.
scientia non olet · About LEMON Manuals