LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Repair Instructions >> Handle Lock Rod Guide Block Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Retaining Guide Block & Handle Lock Rod
    GM794020Courtesy of GENERAL MOTORS CORP.
  1. Install the lock rod guide block (1) to the door.
  2. Install the inside handle rod to the lock rod guide block (1) by pushing inward to secure the rod into the lock rod guide block.
  3. Inspect the door for proper operation.
  4. Install the front or rear door trim panel. Refer to Front Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement .