LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Repair Instructions >> LED Indicator Replacement - Vehicle Security System >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the garnish moldings from the left and the right windshield pillars. Refer to Windshield Pillar Garnish Molding Replacement .
    2. NOTE: Use the following method to disengage the Head Up Display (HUD) retainers. Do NOT pry the retainers with a flat-bladed tool or other similar device.
    1. Disengage the I/P upper trim panel retainers on the sides of the HUD.
    2. Disengage the retainer rearward of the HUD.

    Failure to follow this method could break the tab on the HUD.
    Fig 1: View Of Upper Trim Panel & Head Up Display
    GM1195543Courtesy of GENERAL MOTORS CORP.
  2. Use your fingers to lift under the edge of the instrument panel (I/P) upper trim panel adjacent to the trim clips. If equipped, disengage the trim panel retainers on the sides of the Head Up Display (HUD) first.
    3. Fig 2: View Of HUD & Trim Panel
    GM1195772Courtesy of GENERAL MOTORS CORP.
  3. If equipped, disengage the retainer rearward of the HUD.
  4. Disengage the remaining trim panel retainers. Use clean shop towels to protect the I/P trim pad from the trim panel retainers. Lift the trim panel for access.
    5. Fig 3: View Of Theft LED
    GM928779Courtesy of GENERAL MOTORS CORP.
  5. Rotate the Theft LED. Remove the theft LED from the trim panel.
    6. Fig 4: View Of Electrical Connector & Theft LED
    GM929254Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the theft LED from the electrical connector. Remove the theft LED.
scientia non olet · About LEMON Manuals