LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Antenna Cable Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the coaxial antenna cables into the vehicle.
  2. Use electrical tape in order to secure the antenna extension cable to the top of the wiring harness. Secure the cable to the harness at least every 150 mm (6 in).
    3. Fig 1: View of Antenna Extension Cable & Antenna Cable
    GM878166Courtesy of GENERAL MOTORS CORP.
  3. Connect the antenna extension lead (1) to the coaxial antenna cable (2).
    4. Fig 2: View of Body Wiring Harness Connector & Radio Antenna Cable
    GM777999Courtesy of GENERAL MOTORS CORP.
  4. Connect the coaxial cable to the radio antenna and to the rear window defog control module.
  5. Install the rear quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .
  6. Reposition the carpet to cover the main body wiring harness and the coaxial cable.
  7. Install the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
scientia non olet · About LEMON Manuals