LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> OnStar Module Bracket Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inverter Electrical Connector
    GM1530168Courtesy of GENERAL MOTORS CORP.
  1. Remove the communication interface module. Refer to Communication Interface Module Replacement .
  2. Remove the communication vehicle interface unit. Refer to OnStar Vehicle Interface Unit Replacement .
  3. Unclip the antenna and module harness (1), from the module bracket.
  4. Disconnect the inverter electrical connector (2).
    5. Fig 2: Positioning Module Bracket In Vehicle
    GM1530173Courtesy of GENERAL MOTORS CORP.
  5. Remove 3 module bracket mounting bolts.
  6. Remove the module bracket.
scientia non olet · About LEMON Manuals