Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electrical Connector And Retaining Screw

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Battery Disconnect Caution .

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
Remove the front floor console. Refer to Front Floor Console Replacement .
Disconnect the electrical connector (1).
Remove the retaining screw, then the Shift Lock Control Module/Shift Lock Solenoid assembly.