Installation Procedure
WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air compressor with the dryer (2) to the bracket.
- Install the air compressor nuts and washers (3).
Tighten: Tighten the nuts to 2 N.m (18 lb in).
- Connect the air hose (1) to the air dryer. Ensure the air hose is fully seated into the air dryer.
- Install the air compressor assembly. Refer to Compressor Assembly Automatic Level Control Air Replacement .
- Pressurize the air suspension system after the repair has been completed. Refer to Air Suspension Pressurization .
- Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
NOTE:
Refer to Fastener Notice
.