Driver Seat Adjuster Memory Module Scan Tool Information
WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Memory Seat Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Column Downward Softstop Pos. | - | Varies | Displays the tilt downward softstop position in volts or counts. |
| Column Forward Softstop Pos. | - | Varies | Displays the telescope forward softstop position in volts or counts. |
| Column Rearward Softstop Pos. | - | Varies | Displays the telescope rearward softstop position in volts or counts. |
| Column Softstop Learn Status | - | Unlearned | Displays Learned if the softstops are learned, and Unlearned if the softstops have not been learned. |
| Column Upward Softstop Pos. | - | Varies | Displays the tilt upward softstop position in volts or counts. |
| Driver Seat Front Vertical Sensor | - | Varies | This displays Volts. This is the voltage supplied to the driver seat front vertical sensor. |
| Driver Seat Horizontal Sensor | - | Varies | This displays Volts. This is the voltage supplied to the driver seat horizontal sensor. |
| Driver Seat HVC Level | - | High | The scan tool displays High, Medium or Low. This is the current level of the driver heated seat or the heated cooled seat. |
| Driver Seat HVC Mode | - | Off | The scan tool displays Off, Back & Cushion, Back Only or Cool. This is the current mode of the driver heated seat or the heated cooled seat. |
| Driver Seat Rear Vertical Sensor | - | Varies | This displays Volts. This is the voltage supplied to the driver seat rear vertical sensor. |
| Driver Seat Recline Sensor | - | Varies | This displays Volts. This is the voltage supplied to the driver seat recline sensor. |
| Front Vertical Downward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical downward switch. |
| Front Vertical Motor Downward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor downward. |
| Front Vertical Motor Upward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor upward. |
| Front Vertical Upward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical upward switch. |
| Horizontal Forward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal forward switch. |
| Horizontal Motor Forward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor forward. |
| Horizontal Motor Rearward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor rearward. |
| Horizontal Rearward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal rearward switch. |
| Lumbar Downward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar downward switch. |
| Lumbar Forward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar forward switch. |
| Lumbar Horizontal Sensor | - | Varies | This displays Volts. This is the voltage supplied to the lumbar horizontal sensor. |
| Lumbar Inflation Value | - | Varies | This displays Volts. This is the voltage stored in memory for the lumbar inflation. |
| Lumbar Vertical Sensor | - | Varies | This displays Volts. This is the voltage supplied to the lumbar vertical sensor. |
| Lumbar Motor Downward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor downward. |
| Lumbar Motor Forward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor forward. |
| Lumbar Motor Rearward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor rearward. |
| Lumbar Motor Upward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor upward. |
| Lumbar Rearward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar rearward switch. |
| Lumbar Upward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar upward switch. |
| Lumbar Vertical Position | - | Varies | This displays Volts. This is the voltage stored in memory for the lumbar vertical position. |
| Lumbar Vertical Sensor | - | Varies | This displays Volts. This is the voltage supplied to the lumbar vertical sensor. |
| Massage Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the massage switch. |
| Memory 1 Telescope Position | - | - | Displays the telescope memory position for driver 1. |
| Memory 1 Tilt Position | - | - | Displays the tilt memory position for driver 1. |
| Lumbar Vertical Position | - | Varies | This displays Volts. This is the voltage stored in memory for the lumbar vertical position. |
| Passenger Seat HVC Level | - | High | The scan tool displays High, Medium or Low. This is the current level of the passenger heated seat or the heated cooled seat. |
| Passenger Seat HVC Mode | - | Off | The scan tool displays Off, Back & Cushion, Back Only or Cool. This is the current mode of the passenger heated seat or the heated cooled seat. |
| Rear Vertical Downward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical downward switch. |
| Rear Vertical Motor Downward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor downward. |
| Rear Vertical Motor Upward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor upward. |
| Rear Vertical Upward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical upward switch. |
| Recline Forward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline forward switch. |
| Recline Motor Forward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor forward. |
| Recline Motor Rearward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor rearward. |
| Recline Rearward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline rearward switch. |
| Seat Front Vertical Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat front vertical position. |
| Seat Horizontal Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat horizontal position. |
| Seat Rear Vertical Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat rear vertical position. |
| Seat Recline Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat recline position. |
| Telescope Forward Command | - | Inactive | Displays Active when the DPM energizes the telescope actuator to move forward. |
| Telescope Forward Switch | - | Inactive | Displays Active when the telescope forward switch is closed. |
| Telescope Rearward Command | - | Inactive | Displays Active when the DPM energizes the telescope actuator to move rearward. |
| Telescope Rearward Switch | - | Inactive | Displays Active when the telescope rearward switch is closed. |
| Telescope Sensor | - | Varies | Displays the forward/rearward position of the steering column in volts or counts. |
| Tilt Down Command | - | Inactive | Displays Active when the DPM energizes the tilt actuator to move down. |
| Tilt Down Switch | - | Inactive | Displays Active when the tilt down switch is closed. |
| Tilt Sensor | - | Varies | Displays the upward/downward position of the steering column in volts or counts. |
| Tilt Up Command | - | Inactive | Displays Active when the DPM energizes the tilt actuator to move up. |
| Tilt Up Switch | - | Inactive | Displays Active when the tilt up switch is closed. |
Memory Seat Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Clear Column Softstops | This output control is used to clear the steering column softstops stored in memory. |
| Front Up/Down | This output control is used to command the driver seat motor Up and Down. |
| Learn Column Softstops | This output control is used to program the steering column softstops. |
| Lumbar Forward/Rearward | This output control is used to command the driver seat lumbar forward and rearward. |
| Lumbar Up/Down | This output control is used to command the driver seat lumbar Up and Down. |
| Rear Up/Down | This output control is used to command the driver seat rear Up and Down. |
| Recline Forward/Rearward | This output control is used to command the driver seat reclining forward and rearward. |
| Seat Forward/Rearward | This output control is used to command the driver seat forward and backward. |
| Telescope In/Out | This output control is used to command the telescope in and out. |
| Tilt Up/Down | This output control is used to command the tilt Up and Down. |