LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2008 >> Torrent Base, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed & MOVEABLE Window Systems >> Diagnostic Information and Procedures >> Power Windows Malfunction >> Component Testing >> Main Power Window Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Main Power Window Switch

  1. Ignition OFF, disconnect the harness connector at the Main Power Window switch.
  2. Test for infinite resistance between the signal terminals 2 and 5 and the B+ circuit terminal 2 with the LR Switch in the INACTIVE position.
    • If less than infinite resistance, replace the Main Power Window switch.
  3. Test for less than 2 ohms of resistance between the signal terminal 2 and the B+ circuit terminal 2 with the switch in the UP position.
    • If greater than the specified range, replace the Main Power Window switch.
  4. Test for less than 2 ohms of resistance between the signal terminal 5 and the B+ circuit terminal 2 with the switch in the DOWN position.
    • If greater than the specified range, replace the Main Power Window switch.
  5. Test for infinite resistance between the signal terminals 3 and 3 and the B+ circuit terminal 2 with the RR Switch in the INACTIVE position.
    • If less than infinite resistance, replace the Main Power Window switch.
  6. Test for less than 2 ohms of resistance between the signal terminal 3 and the B+ circuit terminal 2 with the switch in the UP position.
    • If greater than the specified range, replace the Main Power Window switch.
  7. Test for less than 2 ohms of resistance between the signal terminal 3 and the B+ circuit terminal 2 with the switch in the DOWN position
    • If greater than the specified range, replace the Main Power Window switch.
  8. Test for infinite resistance between the signal terminals 5 and 6 and the B+ circuit terminal 2 with the Front Passenger Switch in the INACTIVE position.
    • If less than infinite resistance, replace the Main Power Window switch.
  9. Test for less than 2 ohms of resistance between the signal terminal 5 and the B+ circuit terminal 2 with the switch in the UP position.
    • If greater than the specified range, replace the Main Power Window switch.
  10. Test for less than 2 ohms of resistance between the signal terminal 6 and the B+ circuit terminal 2 with the switch in the DOWN position.
    • If greater than the specified range, replace the Main Power Window switch.
  11. Test for infinite resistance between the signal terminals 5 and 4 and the B+ circuit terminal 2 with the Driver Switch in the INACTIVE position.
    • If less than infinite resistance, replace the Main Power Window switch.
  12. Test for less than 2 ohms of resistance between the signal terminal 5 and the B+ circuit terminal 2 with the switch in the UP position.
    • If greater than the specified range, replace the Main Power Window switch.
  13. Test for less than 2 ohms of resistance between the signal terminal 4 and the B+ circuit terminal 2 with the switch in the DOWN position.
    • If greater than the specified range, replace the Main Power Window switch.
scientia non olet · About LEMON Manuals