Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Ambient Light Sensor At I/P Upper Trim Panel

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the ambient light sensor.
Align the sensor to the upper trim pad and twist into place.

Fig 2: Removing/Installing Upper Trim Pad

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Align the upper trim pad to the I/P and fasten the bolts in place.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
Install the windshield garnish moldings. Refer to Windshield Upper Garnish Molding Replacement in Interior Trim.
Install the I/P cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.

Fig 3: Removing/Installing Access Panel Covers

Courtesy of GENERAL MOTORS CORP.

Install the access panel covers to the upper trim pad.
Test the ambient light sensor for proper operation.