Body Control Module Scan Tool Information
WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM) Scan Tool Data Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Engine ON | |||
| Automatic Door Locking | - | No | The scan tool displays Yes or No. This is the current status of the automatic door locking feature. |
| Automatic Door Unlocking | - | No | The scan tool displays Yes or No. This is the current status of the automatic door unlocking feature. |
| Cruise Control | - | OK | The scan tool displays OK or Fault. This is the current status of the cruise control system. |
| Driver Door Jamb Sw. | - | Off | This displays On or Off. This is the current status of the driver door jamb switch. |
| Hatch/Trunk Ajar | - | Varies | The scan tool displays Active or Inactive. This is the current status of the hatch/trunk ajar signal. |
| Ign. Accessory | - | Inactive | The scan tool displays Active or Inactive. This is the status of the ignition accessory. |
| Ignition Switch | - | On | The scan tool displays On or Off. This is the current status of the ignition switch. |
| IPC Serial Communications Fault | - | Off | The scan tool displays On or Off. This is the current status of communication with the IPC. |
| Park Assist System Status | - | Not Equipped | This displays Equipped or Not Equipped. This is displayed if vehicle is park assist system equipped |
| Parking Brake Switch | - | Off | This displays On or Off. This is the current status of the parking brake. |
| Passenger Door Ajar Sw. | - | Off | This displays On or Off. This is the current status of the passenger door ajar switch. |
| Remote Panic Command | - | No | The scan tool displays Yes or No. This is the current status of the key fob panic command. |
| Sunroof Enable Command | - | Enable | This displays Enable or Disable. This is the current status to open the sunroof. |
| Theft Deterrent Status | - | OK to Start | This displays OK to Start or No Start. This is the current vehicle start status. |
| Tire Pressure Monitor | - | Not Present | This displays Present or Not Present. This is displayed if vehicle is TPM equipped. |
Body Control Module Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Door Lock | This output control is used to command the door lock On and Off. |
| Driver Door Unlock | This output control is used to command the driver door unlock On and Off. |
| Headlamps | This output control is used to command the headlamp relay On and Off. |
| Horn | This output control is used to command the vehicle horn On and Off. |
| Interior Lamps | This output control is used to command the illuminated entry system On and Off. |
| Security Lamp | This output control is used to command the daytime running lamps On and Off. |
| Fog Lamps | This output control is used to command the fog lamps On and Off. |
| High Beams | This output control is used to command the security indicator On and Off. |
| Theft System Horn | This output control is used to command the security horn On and Off. |
| Twilight Sentinel | This output control is used to command the twilight relay On and Off. |