Setup for Component Replacement
WARNING: This page is about a different car, the 2011 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of some components will require a setup procedure for complete repair.
- If any of the following components are replaced, an Idle Learn Procedure must be performed. Refer to Throttle/Idle Learn
.
- Throttle body assembly
- ECM
- If any of the following components are replaced, a CKP Variation Learn Procedure must be performed. Refer to Crankshaft Position System Variation Learn
.
- CKP sensor
- Engine replacement
- Any engine repair that disturbs the relationship between CKP sensor and the crankshaft reluctor wheel.
- If any of the following components are replaced, a Clutch Pedal Position Sensor Learn Procedure must be performed. Refer to Clutch Pedal Position Sensor Learn
.
- Clutch pedal
- Clutch pedal position sensor
NOTE:
If the throttle plate is cleaned, an Idle Learn Procedure must be performed.