Setup for Component Replacement

WARNING: This page is about a different car, the 2011 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

The replacement of some components will require a setup procedure for complete repair.

If any of the following components are replaced, an idle learn procedure must be performed. Refer to the appropriate procedure:
- THROTTLE/IDLE LEARN
  - Throttle body assembly
  - ECM
If any of the following components are replaced, a CKP variation learn procedure must be performed. Refer to the appropriate procedure:
- CRANKSHAFT POSITION SYSTEM VARIATION LEARN for the 1.6L (LXT) engine
  - CKP sensor
  - Engine replacement
  - Any engine repair that disturbs the relationship between CKP sensor and the crankshaft reluctor wheel.