Removal Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Storage Compartment

Courtesy of GENERAL MOTORS CORP.

WARNING: Refer to Battery Disconnect Warning .

NOTE: Remote keyless transmitters must be programmed when remote control module/receiver is replaced.

Disconnect the negative battery cable.
Remove the instrument panel storage compartment. Refer to Instrument Panel Storage Compartment Replacement .
Disconnect the control module/receiver electrical connector.

Fig 2: Control Module/Receiver

Courtesy of GENERAL MOTORS CORP.

Slide the control module/receiver (1) away from its mounting bracket.