Setup for Component Replacement

The replacement of some components will require a setup procedure for complete repair.

• If any of the following components are replaced, an Idle Learn Procedure must be performed. Refer to Throttle Learn for the 3.6L engine or Throttle Learn for the 6.0L engine.
  • Throttle body assembly
  • ECM
• If any of the following components are replaced, a CKP Variation Learn Procedure must be performed. Refer to Crankshaft Position System Variation Learn for the 6.0L engine.
  • Engine replacement
  • Any engine repair that disables the crankshaft position (CKP) sensor or its relationship with the crankshaft reluctor wheel
  • CKP sensor
• If any of the following components are replaced, a Clutch Pedal Position Sensor Learn Procedure must be performed. Refer to Clutch Pedal Position Sensor Learn ,
  • Clutch pedal
  • Clutch pedal position sensor