Inflatable Restraint Front End Sensor Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Inflatable Restraint Front End Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
WARNING: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs. Preliminary Procedure: Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
1	Forward Discriminating Sensor Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tip: Loosen the bolts in order to remove the sensor. Bolts could be reverse threaded. Tighten: 8 N.m (71 lb in)
2	Forward Discriminating Sensor Tip: Remove the connector position assurance (CPA) retainer. Disconnect the electrical connector.