LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Cooling System) >> Specifications >> Fastener Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Condenser to Radiator Retaining Bolt 11 N.m 97 lb in
Coolant Air Bleed Hose Retaining Clamp 4 N.m 35 lb in
Coolant Air Bleed Pipe Retaining Bolts 12 N.m 106 lb in
Coolant Inlet Pipe to Alternator Bracket Retaining Nut - 3.6L 25 N.m 18 lb ft
Coolant Recovery Reservoir Retaining Nuts 17 N.m 13 lb ft
Cooling Fan Blade Retaining Nut 6 N.m 53 lb in
Cooling Fan Motor to Fan Shroud Bolt 10 N.m 89 lb in
Coolant Inlet Pipe Retaining Bolt 35 N.m 26 lb ft
Heater Pipe Assembly to Thermostat Housing Retaining Bolts - 3.6L 10 N.m 89 lb in
Radiator Cap 5 N.m 44 lb in
Radiator Drain Plug 2 N.m 18 lb in
Thermostat Housing Retaining Bolts - 6.0L 14 N.m 124 lb in
Thermostat Housing to Cylinder Block Retaining Bolts - 3.6L 10 N.m 89 lb in
  • Water Pump to Engine Front Cover Retaining Bolts - 3.6
 10 N.m 89 lb in
  • Water Pump Pulley to Water Pump Retaining Bolts - 3.6
 10 N.m 89 lb in
Water Pump Retaining Bolts - 6.0L 25 N.m 18 lb ft
  • First Pass
 15 N.m 11 lb ft
  • Final Pass
 25 N.m 18 lb ft
scientia non olet · About LEMON Manuals