Component Testing
WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the passenger window motor.
- Install a 25A fused jumper wire between the control terminal A and 12 volts. Momentarily install a jumper wire between the control terminal B and ground. The passenger window motor should perform the UP or DOWN function.
- If the function does not perform as specified, replace the passenger window motor.
- Reverse the jumper wires; the passenger window motor should perform the DOWN or UP function.
- If the function does not perform as specified, replace the passenger window motor.