LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Bushing Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of KM-619, Front Control Arm With Bushing & CH-48510
    GM1949949Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The bushing must be lubricated with soapy water solution to ease the installation process.
    IMPORTANT: Before installing, the bushing must be properly aligned and orientated. The depth to which the bushing is going to travel must also be observed and maintained.
  1. Using the KM-619  (1) and CH-48510  (4), install the NEW bushing (2) to the front control arm (3). See Special Tools .
  2. Install the front control arm. Refer to Control Arm Replacement .
  3. Install the front wheel. Refer to Tire and Wheel Removal and Installation .
  4. Remove the safety stands.
  5. Lower the vehicle to the ground.
scientia non olet · About LEMON Manuals