Programming the BCM
WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The vehicle will not start and many other functions may not operate correctly if a replacement BCM is not correctly set up. The following procedures must be followed:
- The BCM reprogramming - Refer to Service Programming System (SPS) Notice .
- Brake pedal position sensor (BPPS) learn.
- Program SDM primary key to BCM
IMPORTANT:
After the procedure is completed, the personalization settings of the BCM are set to default settings. Inform the customer that the personalization must be set again.