Radio Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Receiver & Bolts

Courtesy of GENERAL MOTORS COMPANY

Radio Replacement

Callout	Component Name
Preliminary Procedure Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Center Trim Panel Replacement . Remove the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement . Remove the I/P center air outlet. Refer to Instrument Panel Center Air Outlet Replacement . If installing a replacement radio, program the radio. Refer to Control Module References .
1	Radio Bolt/Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	AM/FM Stereo Radio Receiver

Callout

Component Name

Preliminary Procedure

Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Center Trim Panel Replacement .
Remove the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement .
Remove the I/P center air outlet. Refer to Instrument Panel Center Air Outlet Replacement .
If installing a replacement radio, program the radio. Refer to Control Module References .

Radio Bolt/Screw (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
2 N.m (18 lb in)

AM/FM Stereo Radio Receiver