DTC B1750: Communication Circuit Error (BUS-OFF)
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Clear the DTCs with the HDS.
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Wait for at least 6 seconds.
- Check for DTCs with the HDS.
Are DTCs B1000 and B1011 also indicated with DTC B1750?
YES -Troubleshoot DTC B1000 (see DTC B1000: COMMUNICATION CIRCUIT ERROR (BUS-OFF) ).
NO -Intermittent failure, the system is OK at this time.