Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Install the generator to the generator bracket.
- Install the generator bolts.
Tighten: Tighten the generator bolts to 50 N.m (37 lb ft).
- Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 3.4L.
- Install the generator electrical connector.
- Install the generator B+ lead.
- Install the generator B+ terminal nut.
Tighten: Tighten the generator B+ terminal nut to 20 N.m (15 lb ft).
- Install the battery ground (negative) cable to the battery. Refer to Battery Negative Cable Disconnect/Connect Procedure .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.