LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2009 >> Vibe Base, 1.8 8, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 1.8L (Lay) - Introduction >> Repair Instructions >> Camshaft Position Sensor Replacement - Intake >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement .
    2. Fig 1: Locating No. 1 Camshaft Position Sensor Connector
    GM2016629Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the No. 1 camshaft position sensor connector.
    3. Fig 2: View Of No. 1 Camshaft Position Sensor Bolt
    GM2016630Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolt and No. 1 camshaft position sensor.
scientia non olet · About LEMON Manuals