Installation Procedure

Fig 1: Remote Control Door Lock Receiver & Mounting Bracket

Courtesy of GENERAL MOTORS CORP.

Install the remote control door lock receiver (2) to the mounting bracket (1), if removed.

Fig 2: Remote Control Door Lock Receiver, Electrical Connector & Bolt

Courtesy of GENERAL MOTORS CORP.

Install the remote control door lock receiver (1) to the vehicle.
Install the bolt (3) to the door lock receiver (1).
Tighten: Tighten the remote control door lock receiver bolt to 10 N.m (89 lb in).
Connect the remote control door lock receiver electrical connector (2).
Install the right upper quarter panel trim. Refer to Quarter Upper Trim Panel Replacement .
Connect the negative battery cable.
Reprogram the remote control door lock receiver, if necessary. Refer to Control Module References .