LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2010 >> Vibe Base, 1.8 8, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 1.8L (Lay) - Repair Instructions >> Repair Instructions >> Fuel Sender Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Installing Fuel Sender Gage Assembly By Sliding It Downward
    GM2016812Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel sender gage assembly by sliding it downward.
    2. NOTE: Make sure that the fuel sender gauge arm does not bend.
  2. Connect the connector (1) of the fuel sender gage assembly.
  3. Install the fuel pump. Refer to Fuel Pump and Fuel Filter Assembly Replacement .
scientia non olet · About LEMON Manuals