Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Transmitter Battery

Courtesy of GENERAL MOTORS CORP.

Install a battery (lithium battery: CR2025) with the positive (+) side facing upward.

Fig 2: Installing Cover

Courtesy of GENERAL MOTORS CORP.

Install the cover.

Fig 3: Installing Door Control Transmitter Module

Courtesy of GENERAL MOTORS CORP.

Install the door control transmitter module into the transmitter housing case.

Fig 4: Installing Transmitter Housing Cover

Courtesy of GENERAL MOTORS CORP.

Install the transmitter housing cover to the transmitter housing case.
Check that the transmitter LED illuminates when the switch is pressed.