Motor Relay (Pump Motor Runs)
With Light Emitting Diode (LED) on at position 4, depress button. If Lamp 3 (Green), test is satisfactory. Proceed to PROGRAM SWITCH POSITION 5. If Lamp 4 (Red) is on, repeat PROGRAM SWITCH POSITION 3.
With Light Emitting Diode (LED) on at position 4, depress button. If Lamp 3 (Green), test is satisfactory. Proceed to PROGRAM SWITCH POSITION 5. If Lamp 4 (Red) is on, repeat PROGRAM SWITCH POSITION 3.