DME Control Module, Removing and Installing

Removal
1. Put rear body-protection cover on the vehicle.
2. Press off expanding rivets of the luggage compartment lining with a removal tool.







3. Undo four hexagon nuts (wrench size 10 mm).







4. Take off control module. Open locking clip and pull the control module connector off.

Installation
1. Engage control module connector in the control module guide and press and lock the plug onto the terminal strip.
2. Fasten the control module.
Tightening torque 10 Nm (7.5 ft. lbs.)
3. Fit luggage compartment lining.