Reading out adaption values

The adaption values can be read and stored in the Tiptronic log with this menu item.

Procedure:

1. Using the Porsche System Tester II No. 9588, select menu item 'Read adaption values'.
2. Press the [F4] key.
3. Enter the correct chassis number with the and keys or and keys [-->] and [<--] confirm with the [>>] key.
4. Wait until 'Adaption values have been stored in the Tiptronic log' is displayed.
5. End process with the [<<] key.

The adaption values can now be output in the Tiptronic log.