Front Power Window Switch

Removing and Installing Switch for Front Power Window
Switch off ignition and remove ignition key before starting removal operations.

Removing switch for front power window







1. Lever out the entire power window switch using a plastic spatula.







2. Press down the electrical connector -a- and pull connector out of power window switch.







3. Unscrew the fastening screws from the retaining bracket.
4. Remove power window switch from the retaining bracket.

Installing switch for front power window







1. Insert power window in retaining bracket.
2. Screw in and tighten the fastening screws.







3. Insert the electrical plug connection in the power window switch until it clicks into place.







4. Position the power window switch in the door trim panel and press it in.
5. Make sure that the power window switch is positioned evenly on the gap.