Fault status
WARNING: This page is about a different car, the 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
The following status types are possible:
- present
- not present
This information should be saved using the Save key [F4] and printed out.
NOTE:
Visual inspection: During troubleshooting, please check first that the affected pins on the control module plug connection are neither damaged nor corroded. The wires and plugs of the affected components must also be checked for external damage and correct contact. Repair damaged or corroded pins if possible, otherwise replace affected pins. Repair or replace damaged wires.
NOTE:
Battery positive voltage: A battery positive voltage of between 11.4 and 14.5 V is required for troubleshooting. This must be checked and ensured if necessary. Voltages must be ensured up to components or fuses (input side) on the vehicle electrical system.