LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2004 >> Cayenne Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - Automatic Transmission >> Adjustments >> Selector Lever Cable
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Selector Lever Cable

  1. Move selector lever to position "P". Remove selector knob. See SELECTOR KNOB  under REMOVAL & INSTALLATION.
  2. Remove center console cover, by removing two screws (arrows). See Fig 1 . Disconnect plug connection (inset), tip cover up and back, then remove cover.
    Fig 1: Removing Center Console Cover
    G00380512Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Remove selector frame bolts (arrows). See Fig 2 . Undo selector lever cable screw connection on selector support (right arrow), using special inserts (model AB 170) tool. See Fig 3 .
    Fig 2: Removing Selector Frame
    G00380513Courtesy of PORSCHE OF NORTH AMERICA, INC.
    Fig 3: Removing Selector Lever Cable Connections
    G00380514Courtesy of PORSCHE OF NORTH AMERICA, INC.
  4. Remove engine guard. See Figure . Move shift lever on transmission to position "P" (highest position).
  5. Using special tool, with special inserts (model AB 170), and accessory for torque wrench, open ring wrench insert a/f 13 with adapter 98-1, screw in selector lever cable screw connections on selector support (right arrow). See Fig 3 . Tighten to 89 INCH lbs. (10 N.m).
  6. Install selector frame. Tighten bolts to 53 INCH lbs. (6 N.m). Connect cable connection on underside (inset) of center console cover. See Fig 1 . Install center console cover screws.
  7. Install selector lever knob. Check functions of selector lever cable. Ensure vehicle starts, and selector lever works in all positions. Install engine guard.
scientia non olet · About LEMON Manuals