LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2004 >> Cayenne Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - Automatic Transmission >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
All-Wheel Final Drive Drain Plug 26 (35)
All-Wheel Final Drive Oil Inspection Plug 26 (35)
ATF Line Connection 22 (30)
ATF Cooler Line-To-Transmission (3.2L) 18 (25)
ATF Cooler Line-To-Transmission 18 (25)
Cardan Shaft-To-Transfer Box (1)
Step 1 22 (30)
Step 2 Additional 90° Turn
Engine Carrier-To-Body (1)
Step 1 74 (100)
Step 2 Additional 180° Turn
Engine Carrier-To-Engine Mount 44 (60)
Exhaust System-To-Cross Member 17 (23)
Hydraulic Mount-To-Carrier Side Section 17 (23)
Steering Column-To-Steering Gear (1)
Step 1 26 (35)
Step 2 Additional 90° Turn
Suspension (Front) Subframe Bolts (1)
Step 1 74 (100)
Step 2 Additional 180° Turn
Torque Support-To-Body 44 (60)
Torque Support-To-Engine 44 (60)
Transfer Case Drain Plug 15 (20)
Transfer Case Inspection Plug 15 (20)
Transfer Case Output Flange Shaft Nut 89 (120)
Transmission Cross Member-To-Body (1)
Step 1 37 (50)
Step 2 Additional 90° Turn
Transmission Drain Plug 21 (28)
Transmission Oil Inspection Plug 52 (70)
Wheel Lug Bolt (2) 118 (160)
INCH Lbs. (N.m) 
ATF Cooler Line-To-Engine Oil Pan 53 (8)
ATF Cooler Line-To-ATF Thermostat 89 (10)
ATF Cooler Line-To-Engine Oil Pan (3.2L) 89 (10)
ATF Cooler Line-To-ATF Thermostat (3.2L) 89 (10)
ATF Cooler Line-To-Transmission Bell Housing (3.2L) 89 (10)
ATF Filter Bolt 89 (10)
ATF Temperature Sensor 89 (10)
ATF Thermostat-To-Cooler 31 (3.5)
Heat Shield-To-Steering Gear 89 (10)
Multi-Function Switch 44 (5)
Output Shaft Speed Inductive Pickup 89 (10)
Selector Lever Cable-To-Adjustment Part 89 (10)
Selector Lever Frame Bolt 53 (6)
Selector Lever Cable-To-Selector Frame 89 (10)
Selector Shaft-To-Cap Nut 132 (15)
Selector Shaft-To-Nut 62 (7)
Selector Support-To-Body 53 (6)
Transmission Oil Pan Bolt 89 (10)
Transmission Wire Harness 89 (10)
Valve Body Bolt
Step 1 71 (8)
Step 2 Additional 90° Turn
(1) Always replace with NEW fasteners.
(2) Thinly grease thread, shank and under head of wheel bolts with Optimoly TA (aluminum paste). DO NOT grease bearing surface of the spherical cap facing the wheel. If heavily contaminated, clean bolts with a lint free cloth.