Terminal 15 power supply: Notes
NOTE:
The ignition must be switched off and then switched on again in order to display an error message in the instrument cluster.
NOTE:
First check the fuse. This fault can also indicate a faulty fuse! Fuse carrier at right of dashboard, fuse 51.
System in limp-home mode 1: Fault not caused by incorrect gear ratio or unusual switching!
NOTE:
Please refer to 'LIMP-HOME MODE 1 ' table in the main chapter entitled 'Control module function (coding/programming)'!
Use the 'Actual values' menu in the Porsche System Tester II No. 9588 to check the transmission status and the actual values of the shift solenoid valves and sensors.