| Air Conditioning |
| Service |
Technical Data For Air-Conditioning System |
| Torque |
|
| Axle Nut/Hub Nut |
460 Nm (340 ftlb.) |
| Battery |
Engine Electronics |
| Brakes |
| Bleeding Sequence |
WM 470107 BLEEDING THE BRAKE SYSTEM (ALL MODELS) |
| Disc Brakes |
WM 4600TW TECHNICAL DATA/BRAKE WEAR LIMIT (EXCEPT BOXSTER LIM. ED. "ORANGE", BOXSTER BLACK EDITION, BOXSTER "SPORT EDITION", BOXSTER S BLACK EDITION, CAYMAN R) |
| Torque |
WM 4600TW TIGHTENING TORQUES FOR BRAKE MECHANISM (ALL MODELS) |
| Charging |
| Generator |
Engine Electronics |
| Torque |
Technical Values |
| Drive Belts |
| Adjustment |
Installing Drive Belt |
| Belt Routing |
Installing Drive Belt |
| Engine Cooling |
| General Service Specifications |
WM 1901TW TECHNICAL DATA, COOLING SYSTEM (EXCEPT CAYMAN BLACK EDITION, CAYMAN S BLACK EDITION, BOXSTER BLACK EDITION, BOXSTER SPYDER, BOXSTER S BLACK EDITION & CAYMAN R) |
| Radiator Cap Pressure |
Checking lid (on reservoir) |
| |
Thermostat R & I |
|
| |
Water Pump R & I |
|
| Engine Mechanical |
| Compression |
Engine M96/25, M96/26 And M97/21 |
| Oil Pressure |
WM 1701TW TECHNICAL DATA, LUBRICATION SYSTEM (EXCEPT CAYMAN BLACK EDITION, CAYMAN S BLACK EDITION, BOXSTER BLACK EDITION, BOXSTER SPYDER, BOXSTER S BLACK EDITION, CAYMAN R) |
| Overhaul |
WM 100119 REMOVING AND INSTALLING ENGINE (ALL MODELS) |
| Torque |
Technical Values |
| Fluid Specifications |
See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. |
| Flywheel/Flex Plate/Drive Plate Torque |
| FLYWHEEL |
| |
Initial tightening |
19 ftlb. |
| |
Final tightening - torque angle |
120° |
| |
DUAL-MASS FLYWHEEL |
| |
Initial tightening |
25 Nm (19 ftlb.) |
| |
Final tightening - torque angle |
120° |
| |
|
FLYWHEEL - PDK TRANSMISSION |
| |
Initial tightening |
25 Nm (19 ftlb.) |
| |
Final tightening - torque angle |
120° |
| Fuel System |
| Pressure Specification |
| |
Fuel pressure - engine not running |
3.8 bar +/-0.2 bar |
| |
Fuel pressure - idle speed |
3.8 bar +/-0.2 bar |
| |
Fuel Pressure Test Procedure |
WM 200201 CHECKING FUEL PRESSURE (EXCEPT CAYMAN BLACK EDITION, CAYMAN S BLACK EDITION, BOXSTER BLACK EDITION, BOXSTER SPYDER, BOXSTER S BLACK EDITION, CAYMAN R) |
| |
Fuel Filter Location |
Located in the fuel tank |
| |
Fuel Filter R & I |
N/A |
| Ignition |
| Firing Order |
1 - 6 - 2 - 4 - 3 - 5 |
| Ignition Wires (Resistance) |
Coil On Plug |
| Ignition Wires (Routing) |
Coil On Plug |
| Spark Plug |
| Gap |
1.6 ± 0.05 mn |
| Torque |
| |
New spark plug |
32 Nm (24 ftlb.) +/-2 Nm (+/-1.5 ftlb.) |
| |
Refitting |
25 Nm (19 ftlb.) |
| Starting |
| |
Starter |
Engine Electronics |
| |
Torque |
- WM 276019 REMOVING AND INSTALLING STARTER (CAYMAN S, CAYMAN S "PORSCHE DESIGN EDITION 1", CAYMAN S SPORT, BOXSTER S, BOXSTER S LIM. ED. "ORANGE", BOXSTER S "RS 60 SPYDER", BOXSTER S "SPORT EDITION", BOXSTER SPYDER, BOXSTER S "PORSCHE DESIGN EDITION 2")
- WM 276019 REMOVING AND INSTALLING STARTER (EXCEPT CAYMAN BLACK EDITION, CAYMAN S BLACK EDITION, BOXSTER BLACK EDITION, BOXSTER S BLACK EDITION, CAYMAN R)
|
| Wheel Alignment |
| |
Adjustment Specifications |
WM 4400TW ADJUSTMENT VALUES FOR SUSPENSION ALIGNMENT (ALL MODELS) |
| |
Torque |
| |
Front |
WM 4001TW TIGHTENING TORQUES FOR FRONT AXLE (ALL MODELS) |
| |
Rear |
WM 4201TW TIGHTENING TORQUES FOR REAR AXLE (ALL MODELS) |
| Wheel & Tire |
| Wheel Lug Nut Torque |
| |
Silver wheel bolts (up to model year 2011) |
130 Nm (96 ftlb.)
160 Nm (118 ftlb.) also permitted retroactively |
| |
Silver wheel bolts as of model year 2012 |
160 Nm (118 ftlb.) |
| |
Black wheel bolts |
160 Nm (118 ftlb.) |