LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2008 >> Cayenne Base, Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Electronic Suspension >> 43 - Level Control, Air Suspension >> WM 431619 Removing And Installing Level Control Module >> Installing The Level Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installing The Level Control Module

  1. First place the smaller plug on the control module and slide in the latch -a-  .
    Fig 1: Pushing Plug On Bottom Of Level Control Module
    G09419243Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position the control module in the installation position and insert the second plug on the control module and lock it -a- 
    Fig 2: Pushing Plug On Top Of Level Control Module
    G09419244Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Code level control module. → Coding Level Control Module 
  4. Calibrate the level control module → Calibrating The Level Control Module 
  5. Insert the control module into the holder and position with the clip.
  6. Store the emergency kit and warning triangle and place on the cover of the right rear side section trim.