Control position not adjustable: Diagnosis/troubleshooting
WARNING: This page is about a different car, the 2006 Porsche Cayenne, 2005 Porsche Cayenne, 2004 Porsche Cayenne, and 2003 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS/TROUBLESHOOTING PROCEDURE
| Work instruction | Display OK | If not OK | |
|---|---|---|---|
| 1 | Check mechanical and pneumatic components | Go to Step 3 | Repair/replace components in accordance with procedures in LEVEL CONTROL article . Go to Step 2 |
| 2 | Check to see if other faults are recorded (e.g. 0774,0775,0776,1780) | Go to Step 4 | Correct faults and read out fault memory for level control module again. If OK: → End If not OK: → Step 3 |
| 3 | Re-calibrate level control module Calibrating level control module, refer to 43 K2 CALIBRATION - AS OF MY 2003 (ALL MODELS EXCEPT CAYENNE S TIO TITAN) . |
→ End | Go to Step 4 |
| 4 | Replace level control module | → End | |