Vehicle level sensor: Diagnosis/troubleshooting

WARNING: This page is about a different car, the 2006 Porsche Cayenne, 2005 Porsche Cayenne, 2004 Porsche Cayenne, and 2003 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If a vehicle level sensor or the level control module is replaced, it must be calibrated using the 9588 Porsche System Tester II.

DIAGNOSIS/TROUBLESHOOTING PROCEDURE

Work instruction			Display OK	If not OK
1	Check vehicle tires:	Check that the tires on the vehicle correspond to the specified tire size.	Go to Step 2	Repair or replace vehicle tires. → End
2	Check vehicle level sensor mechanism:	Check the connecting rods of the vehicle level sensors for damage. Check wheel suspension.	Go to Step 3	Repair or replace mechanism. → End
3	Re-calibrate level control module Calibrating level control module, refer to 43 K2 CALIBRATION - AS OF MY 2003 (ALL MODELS EXCEPT CAYENNE S TIO TITAN) .		→ End	Go to Step 4
4	Replace one or more vehicle level sensors.		→ End	Go to Step 5
5	Replace level control module.		→ End