Installing Pressure Sensor Mat

Position pressure sensor mat.
1. 1.1. Guide the connector -3- and line through the opening on the seat frame -2- .
  
  Fig 1: Positioning Connector And Line
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Guide the tab on the pressure sensor mat -1- through the seat frame -2- .
  
  Fig 2: Positioning Tab
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. 1.3. Align the pressure sensor mat -1- on the seat frame -2- and secure it to the seat frame with clips -4- .
  
  Fig 3: Clipping Pressure Sensor Mat
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Secure the pressure line.
1. 2.1. Route the pressure line -3- as shown and engage the retaining clip -5- in the seat frame.
  
  Fig 4: Securing Pressure Line
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install padding for seat. → REPLACING PADDING FOR FRONT BACKREST - section on "Installing"
Engage the retaining clip -6- from below through the tab on the pressure sensor mat into the padding -7- .

Fig 5: Engaging Retaining Clip
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Check that the pressure line is positioned without tension and is not twisted.
Push on electric plug connection.