Removal And Installation: Installation
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
- Install the 3 retaining bolts for the adaptive speed control module.
Torque: 5 Nm
- Connect the electrical connector.
- Install the 3 retaining bolts for the adaptive speed control module.
- Install the front bumper.
Refer to: FRONT BUMPER .
- Connect the startup battery ground cable.
Refer to: SPECIFICATIONS .
- Check the alignment of the speed control sensor.
Refer to: SPEED CONTROL .